Comforpur 690 Greenline

Depth without losing the clean character

A completely plain resin floor can look flat in a large space. Comforpur 690 Greenline is blended with fine quartz sand, which gives a slightly sandy texture and more depth while the floor stays clean-lined. It is available in a single colour and in a concrete-look version.

Applied in an occupied building

The scratch coat beneath the self-levelling layer is built up with a plant-derived, renewable resin and is low in odour. The system can therefore be applied in spaces that are in use or occupied, whether a home renovated without moving out or an office that has to keep running.

Comfort, colour and maintenance

The self-levelling layer is aliphatic and therefore colour-stable in daylight, tough and elastic, and comfortable to walk and stand on. The matt topcoat is highly wear-resistant, contains UV absorbers and is bacteriostatic, with a wear resistance of approximately 31 mg in the Taber test with CS17 wheels after 1.000 cycles. The floor is seamless, liquid-tight, suitable for underfloor heating and easy to clean.

Where we apply this

• Living rooms, kitchens and hallways
• Shops, showrooms and hospitality venues
• Offices and representative spaces
• Schools, healthcare facilities and cultural buildings
• Spaces that remain in use during installation

What to bear in mind

Unevenness and dirt inclusions in the substrate remain visible, so preparation determines the final result. Rubber can cause discolouration through plasticisers, so use felt pads. The floor takes foot traffic 24 hours after the topcoat, light loads after 48 hours and full loads after 7 days.